Velg land for levering av forsendelsen

Salget er avsluttet

Audio-Technica AT-MONO3/SP

Produktkode: 372970 (AT-MONO3SP)

Salget er avsluttet

Audio-Technica AT-MONO3/SP

Produktkode: 372970 (AT-MONO3SP)

Salget er avsluttet
Dette produktet produseres ikke lenger eller er ikke lenger en del av vårt tilbud. Vi anbefaler at du velger et alternativt produkt.
Hi-Fi-kassett Audio-Technica AT-MONO3/SP

Audio-Technica AT-MONO3/SP

Velg et alternativ (4)
The AT-MONO3/SP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with 78 RPM mono shellac records. Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/SP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate...

Audio-Technica AT-MONO3/SP

The AT-MONO3/SP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with 78 RPM mono shellac records. Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/SP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction to keep groove wear to a minimum. The voice coils are wired in series, resulting in one mono signal that is transmitted to the cartridge’s white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp.

Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

The cartridge’s low-mass 2.5 mil conical stylus is mounted on an aluminum cantilever for excellent tracking of the wider 78 RPM shellac grooves. The cartridge features a strong, rigid body of die-cast aluminum alloy and synthetic resin to eliminate unnecessary vibrations.

This cartridge with 2.5 mil conical stylus is not compatible with microgroove 33-1/3 and 45 RPM vinyl records. It is designed to play 78 RPM SP (standard play) shellac records.

Suitability

Application

Hi-Fi

Suitable for Brand

Ordinary Turntable Brands

Properties

Shape

Conical

Tracking Force

3 - 7 g

Tracking force recommended

5 g

Tracking angle

23°

Stylus tip radius

2,5 mil

Frequency Range

22 Hz - 22 kHz

Recommended load resistance

400 Ohm - 47 kOhm

Material
Package

Package Contents

Brush, Nut, Screwdriver, Screws, Spacer, Washer

Power supply
Dimensions and Weight

Weight

6,8 g

Country

Made in

Japan

Dokumenter

Informasjon fra produsenten
Produsent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Nederland
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.