Albania
Argentina
Australia
Belgia
Bosnia-Hercegovina
Brasil
Bulgaria
Canada
Chile
Colombia
Danmark
Estland
Filippinene
Finland
France
Hellas
Irland
Italia
Latvia
Litauen
Luxembourg
Mexico
Moldova
Montenegro
Nederland
New Zealand
Nord-Makedonia
Norge
Polen
Portugal
Romania
Sambandsstatene
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Sveits
Sverige
Sør-Afrika
Tsjekkia
Tyrkia
Tyskland
Østerrike
48,80 €
53,90 €
- 9 %
Eksklusivt skatter og avgifter
På lager > 5 stk.
The entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an...
Audio-Technica AT-VM95E
The entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts. Features: Aluminium cantilever; 4.0mV output voltage; Compatible body with all VM95 Series stylus assemblies; Replacement for AT95E and AT95EX; 20 to 22,000Hz frequency response
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå.
Beskrivelsen på engelsk kan være til hjelp.
Model: AT-VM95E
Type: VM Stereo Dual Magnet
Mounting: 1/2” centres
Frequency Response: 20 - 22,000 Hz
Channel Separation: 20 dB (1 kHz)
Output Channel Balance: 2.0 dB (1 kHz)
Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
Stylus Shape: Elliptical
Stylus Size: 0.3 x 0.7 mil
Stylus Construction: Bonded Round Shank
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Recommended Load Capacitance: 100-200 pF
Cartridge Weight: 6.1g
Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement Stylus: AT-VMN95E
Accessories Included: Two 11 mm installation screws; Two 8 mm installation screws; Two washers
Suitability
Properties
Shape
Tracking Force
Tracking force recommended
2 g
Tracking angle
23°
Frequency Range
Impedance (Ohm)
3300
Recommended load resistance
47 kOhm
Recommended load capacitance
100-200 pF
Acoustics
Channel separation at 1 kHz
20
Power supply
Voltage
Accessory
Mounting
1/2"
Country
Made in
China
Alle vurderinger kommer fra verifiserte kunder som har kjøpt et produkt fra oss tidligere.
Ukraina
Ungarn
Automatisert oversettelse
Denne vurderingen kan ikke oversettes.
Ungarn
Automatisert oversettelse
Denne vurderingen kan ikke oversettes.
Kroatia
Ungarn
Dokumenter
Informasjon fra produsenten
Produsent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Nederland
Sikkerhetsinstruksjoner
Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.
