Velg land for levering av forsendelsen

Salget er avsluttet

Audio-Technica AT-VM95SP/H

4,60

Produktkode: 314936 (AT-VM95SP/H)

Salget er avsluttet

Audio-Technica AT-VM95SP/H

4,60

Produktkode: 314936 (AT-VM95SP/H)

Salget er avsluttet
Dette produktet produseres ikke lenger eller er ikke lenger en del av vårt tilbud. Vi anbefaler at du velger et alternativt produkt.
Hi-Fi-kassett Audio-Technica AT-VM95SP/H

Audio-Technica AT-VM95SP/H

Velg et alternativ (3)
Set includes AT-VM95SP cartridge from VM95 series mounted on AT-HS6BK headshell. VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series...

Audio-Technica AT-VM95SP/H

Set includes AT-VM95SP cartridge from VM95 series mounted on AT-HS6BK headshell.

VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.
  • VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Frequency Response: 20 - 20,000 Hz
  • Output Channel Balance: 1.5 dB (1 kHz)
  • Output Voltage: 2.7 mV (@ 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force Range: 4.5 – 5.5 g (standard 5.0 g)
  • Stylus Shape: SP 3 mil Conical Bonded
  • Stylus Size: 3 mil
  • Stylus Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil Impedance: 3.3 kOhm (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • DC Resistance: 485 Ohm
  • Static Compliance: 12 x 10 – 6 cm / dyne
  • Dynamic Compliance: 2 x 10 – 6 cm / dyne (100 Hz)
  • Wire Used for Coil: T.P. Copper
  • Recommended Load Impedance: 47,000 Ohm
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: AT-VMN95SP
  • Dimensions: 21,2 x 21,4 x 62,4 mm
  • Weight: 15,5 g

Suitability
Properties

Shape

Conical

Tracking Force

1,8g - 2,2g

Tracking force recommended

2 g

Tracking angle

23°

Stylus tip radius

3 mil

Frequency Range

20 Hz - 20 kHz

Compliance

2 x 10-6 cm (100Hz)

Recommended load resistance

47 kOhm

Recommended load capacitance

100 - 200 pF

Acoustics

Channel balance at 1 kHz

1,5 dB

Power supply

Voltage

2,7 mV

Dimensions and Weight

Weight

15,5 g

Country

Made in

China

4,60 / 5

Basert på antall vurderinger: 5

5 4
4 0
3 1
2 0
1 0

Alle vurderinger kommer fra verifiserte kunder som har kjøpt et produkt fra oss tidligere.

M

Maciej I.

pl Flagg

Polen

17.03.2025

P

Piotr N.

pl Flagg

Polen

25.01.2025

M

Mate H.

hr Flagg

Kroatia

23.08.2023

Odlično savršeno

Automatisert oversettelse

Denne vurderingen kan ikke oversettes.
V

Vitezslav Z.

cz Flagg

Tsjekkia

12.06.2023

super

Automatisert oversettelse

Denne vurderingen kan ikke oversettes.
P

Péter K.

hu Flagg

Ungarn

24.02.2023

Kb. azt tudja, amit vártam.

Automatisert oversettelse

Denne vurderingen kan ikke oversettes.

Dokumenter

Informasjon fra produsenten
Produsent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Nederland
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.