Velg land for levering av forsendelsen

Ny

MusicNomad MN804 Fret Shield Verktøy for gitar

Produktkode: 1313180

Ny
MusicNomad MN804 Fret Shield Verktøy for gitar

Produktkode: 1313180

499 NKr
Kun forhåndsbestillinger
Leveringstiden vil bli spesifisert etter bestilling fra vår leverandør.
Basert på bestillingen din vil vi forsøke å få varene på lager igjen og kontakte deg med en leveringsdato.
Verktøy for gitar MusicNomad MN804 Fret Shield Verktøy for gitar

MusicNomad MN804 Fret Shield Verktøy for gitar

499 NKr
The MusicNomad MN804 Fret Shield is a stainless steel fretboard protector guard designed specifically for 24.75-inch Epiphone and Guild scale guitars. It replaces the slow, messy process of masking off the fingerboard with blue tape before polishing, leveling, or crowning frets. The reusable shield snaps into place in seconds, secured by...

MusicNomad MN804 Fret Shield Verktøy for gitar

The MusicNomad MN804 Fret Shield is a stainless steel fretboard protector guard designed specifically for 24.75-inch Epiphone and Guild scale guitars. It replaces the slow, messy process of masking off the fingerboard with blue tape before polishing, leveling, or crowning frets. The reusable shield snaps into place in seconds, secured by included rubber bands that conform the metal to your fingerboard radius.

\n
    \n
  • This tool protects the entire fretboard during polishing, leveling, and crowning work.
  • \n
  • Stainless steel at .008\" (.20 mm) thickness
  • \n
  • Drop-down edges and included rubber bands hold it securely in place
  • \n
  • Reusable design that lasts hundreds of fret jobs — no more blue tape
  • \n
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

Fretboard Protector for 24.75\" Epiphone and Guild Guitars

\n

The MusicNomad MN804 Fret Shield is a stainless steel guard that protects the entire fingerboard during fret polishing, leveling, and crowning. Designed for 24.75-inch Epiphone and Guild scale guitars, this tool replaces blue tape with a reusable shield that snaps into place in seconds. The .008\" (.20 mm) stainless steel is burr-free with smooth rounded edges, so it sits on the fretboard without scratching finished maple or unfinished rosewood. Drop-down edges and included rubber bands hold it securely while conforming to the fingerboard radius.

\n

Why Players and Techs Choose This Tool

\n

Polishing frets without protection risks scratches on the fingerboard. This shield eliminates that worry while saving the time spent taping and untaping. Compatibility includes vintage narrow frets up to jumbo sizes and it has been tested with power buffing wheels and steel wool.

Dokumenter

Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.