Velg land for levering av forsendelsen

Nux B-6 PRO

Produktkode: 1183216

Nux B-6 PRO

Produktkode: 1183216

Trådløst system Nux B-6 PRO

Nux B-6 PRO

4 119 NKr
The Nux B-6 PRO is a 2.4 GHz wireless microphone system purpose-built for saxophone, trumpet, and other wind instruments, giving horn players cable-free freedom on stage and in the studio. A clip-on gooseneck condenser mic pairs automatically with a pedal-style receiver that integrates a digital tuner, signal booster, send/return loop, and 11...

Nux B-6 PRO

The Nux B-6 PRO is a 2.4 GHz wireless microphone system purpose-built for saxophone, trumpet, and other wind instruments, giving horn players cable-free freedom on stage and in the studio. A clip-on gooseneck condenser mic pairs automatically with a pedal-style receiver that integrates a digital tuner, signal booster, send/return loop, and 11 instrument-tuned EQ presets. This model delivers 24-bit/48 kHz audio with latency as low as 3.6 ms, a 50 m line-of-sight range, and up to 7 hours of transmitter battery life with magnetic recharging.

  • 2.4 GHz wireless with intelligent frequency hopping and true-diversity antennas for stable, interference-free signal in crowded RF environments.
  • Shock-absorbing gooseneck condenser capsule with cardioid polar pattern captures the natural tone of brass and woodwind instruments.
  • Pedal receiver with 2.4-inch color display, XLR DI output, and USB-C audio for direct recording to phones, tablets, and laptops.
  • Six selectable stability levels (3.6 ms to 9.9 ms latency) let players trade speed for signal robustness depending on the venue.
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

Wireless Saxophone and Wind Instrument Microphone System — 2.4 GHz Freedom for Horn Players

The Nux B-6 PRO is a 2.4 GHz wireless microphone system engineered for saxophone, trumpet, and other wind instruments. Operating on the license-free 2400–2483.5 MHz band, it removes the cable between player and mixer. This system is the right choice for gigging horn players who need a clip-on condenser mic that pairs in seconds and stays locked through long sets.

Pedal-Style Receiver With Pro EQ, Tuner, and Send/Return Loop

The receiver is a stompbox-format unit with a 2.4-inch color display, a built-in digital tuner, a 0 to +12 dB booster, and a hardware send/return loop for inserting effects pedals. Eleven professionally tuned EQ presets cover soprano, alto, and tenor saxophone plus trumpet, with two user slots for custom curves. The transmitter snaps magnetically onto the receiver for cable-free recharging.

Wireless Performance and Audio Specifications

The 2.4 GHz link supports 79 channels with intelligent frequency hopping and true-diversity antennas, automatically selecting the cleanest channel in busy RF environments. Audio runs at 24-bit / 48 kHz with a 122 dB dynamic range and THD+N below 0.01%. The pedalboard-format receiver is not rackmountable.

  • Frequency Band: 2400–2483.5 MHz — license-free 2.4 GHz worldwide
  • Frequency Response: 20 Hz – 20 kHz — full-range brass and woodwind capture
  • Capsule Type: Condenser — unidirectional electret on a shock-absorbing gooseneck
  • The cardioid polar pattern provides focused pickup that rejects off-axis stage noise.
  • Battery Powered: Yes — TX up to 7 h, RX up to 11 h, magnetic charging

Who Should Choose This System

The Nux B-6 PRO is the right choice for saxophonists, trumpeters, and other wind players who want a clip-on wireless mic that disappears on the bell and frees them to move across the stage. Home recordists benefit from the USB-C audio path that streams straight into a phone or laptop without an audio interface, while multi-instrumentalists will appreciate the per-instrument EQ presets and effects loop.

From the B-6 to the Pro: A Saxophone Mic Line Grown Up

The original wireless saxophone system earned a loyal following for its compact clamp and natural tone. The Pro version builds on that with a redesigned shock-absorbing gooseneck, a stompbox receiver with pro EQ and effects loop, and the brand's PRO-series wireless platform featuring true-diversity antennas for stable coexistence in crowded venues.

Suitability

Compatible with

Wind Instruments

Features

Receiver

RX

Transmitter/Microphone

TX

Polar Pattern

Cardioid

Switch

Yes

Properties

Frequency Band

2400 - 2483,5 MHz

Frequency Range

20 Hz - 20 kHz

Capsule Type

Condenser

Rackmountable

No

External Antenna

No

Colour

Black

Inputs and Outputs

Microphone Input

Yes

Outputs

USB-C, Jack 6,3 mm (3 x), XLR

Package

Package Contents

Transmitter, Receiver, Adapter, USB-C Cable, USB-C to USB-A Cable, Windshield, Sticker, Manual

Power supply

Battery Operation

Yes

Battery Type

Integrated

Battery Life

7 h

Power Supply

Adapter, Battery

Accessory

UK/EU Power supply included

Yes

Country

Made in

China

Dokumenter

Instruksjoner for bruk
Informasjon fra produsenten
Produsent:
Nux
No.10, Keji 9th Rd, Tangjiawan, 519085, Zhuhai City, Guangdong Province, Kina
Ansvarlig person:
Muziker a.s
Drieňova 1H, 82101, Bratislava, Slovakia
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.