Velg land for levering av forsendelsen

Avtale

dbx RTA-M Målemikrofon

4,75/5

Produktkode: 20084

Avtale
dbx RTA-M Målemikrofon
4,75/5

Produktkode: 20084

Målemikrofon dbx RTA-M Målemikrofon

dbx RTA-M Målemikrofon

1 179 NKr
1 326 NKr
- 11 %
The dbx RTA-M is a calibrated omnidirectional reference microphone built to capture the acoustic signature of any room with a flat response from 20 Hz to 20 kHz. Designed as the official measurement tool for the DriveRack PA series, it pairs with the System Setup Wizard and Auto EQ Wizard to optimize speaker tuning in real time. Backed by a...

dbx RTA-M Målemikrofon

The dbx RTA-M is a calibrated omnidirectional reference microphone built to capture the acoustic signature of any room with a flat response from 20 Hz to 20 kHz. Designed as the official measurement tool for the DriveRack PA series, it pairs with the System Setup Wizard and Auto EQ Wizard to optimize speaker tuning in real time. Backed by a metal housing, a hard-cover case, and a 9-52 V phantom-powered back electret condenser element, this mic delivers consistent readings whether you are tuning a house of worship, a club, or a touring rig.

\n
  • Flat 20 Hz-20 kHz frequency response for accurate room analysis and pink-noise referencing.
  • Omnidirectional back electret condenser captures the full acoustic picture without proximity bias.
  • Runs on 9-52 V phantom power supplied directly by any DriveRack unit, no extra supply needed.
  • Includes a mic clip and hardcover case for transport between gigs.
  • \n
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

dbx RTA-M Reference Microphone — Calibrated Room Analysis for DriveRack Systems

\n

The dbx RTA-M is the manufacturer's dedicated measurement microphone for the DriveRack PA, PX, PA+, PA2, and 260 processors. As a flat-response omnidirectional reference tool, it captures the full acoustic signature of a venue so the Auto EQ Wizard can apply accurate corrections during system setup. This instrument is the right choice for live sound engineers who need a repeatable measurement chain for room tuning and pink-noise analysis.

\n

Built for the DriveRack Ecosystem and the Road

\n

Unlike generic measurement mics, this model shares its capsule with the M2 mic that ships with the DriveRack PX. The metal housing is more rugged than the M2's plastic body, and the included hardcover case protects the capsule between gigs. Phantom power is drawn straight from the DriveRack unit, so no external supply or battery is needed in the signal chain.

\n

Technical Specifications — Designed for Accurate Real-Time Analysis

\n

Every spec on this measurement microphone is tuned to deliver a clean, uncolored capture of room acoustics for the DriveRack's analysis routines.

\n
  • Element: Back Electret Condenser — stable response across the audible band
  • The omnidirectional polar pattern picks up reflections and direct sound equally for a true room picture, without proximity bias from a single source direction.
  • Frequency Response: 20 Hz - 20 kHz — covers the full range used by the DriveRack's pink-noise analysis
  • Sensitivity: -63 dB ± 3 dB (0 dB = 1 V/microbar at 1 kHz, open circuit) — predictable output for system calibration
  • Operating Voltage: 9-52 V DC phantom power — draws power directly from the DriveRack, no external supply needed
  • \n
\n

Who Should Use the RTA-M

\n

This model is the right choice for live sound engineers, venue technicians, and AV integrators who already own or plan to deploy a DriveRack PA, PX, PA+, PA2, or 260 processor. Equally useful for house-of-worship teams, touring cover bands, and club installers, it helps tame difficult rooms before the first note plays.

Basert på antall vurderinger: 18

Kundevurderinger av produktet

Alle vurderinger kommer fra verifiserte kunder som har kjøpt et produkt fra oss tidligere.

AI-oppsummering av anmeldelser

Basert på antall vurderinger: 18

Styrker

  • High quality build: Customers consistently praise the microphone's robust construction and quality craftsmanship, including its durable plastic case for safe transport.
  • Accurate performance: The microphone fulfills its promised parameters and is effective for room acoustic measurements, delivering excellent results.
  • Seamless compatibility: It works perfectly with the Driverack PA2, making it a crucial accessory for that system.

Svakheter

  • High price: One customer noted that the microphone is relatively expensive.
  • Missing calibration protocol: One user reported not receiving the calibration protocol that the manufacturer typically provides with each product.

Hva kundene gjentar

“Quality and sensitivity” “Works perfectly!” “Fulfills all parameters promised by the manufacturer.” “Good measuring microphone for Drive rackPA2” “Microphone is great”

Konklusjon

This is a high-quality measurement microphone designed for use with Driverack PA2 systems, highly valued by customers for its performance in room acoustic measurements and overall functionality.

Dokumenter

Instruksjoner for bruk
Informasjon fra produsenten
Produsent:
HARMAN Professional Denmark ApS
Olof Palmes Allé 44, 8200, Aarhus , Danmark
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.