Velg land for levering av forsendelsen

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

Produktkode: 1338163

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

Produktkode: 1338163

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under…

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI-kabel

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under footswitches and pedals.

  • 150 cm length with flat rectangular profile that prevents cable jams and breakage on the pedalboard
  • Straight DIN 5-pin MIDI male to angled 3.5 mm TRS stereo male connector configuration
  • TRS-MIDI Type B pin assignment: MIDI 4 (Source) on tip, MIDI 5 (Sink) on ring, MIDI 2 (Shield) on sleeve
  • Compatible with Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar TRS-MIDI Type B devices
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built for pedalboard use, it keeps the MIDI signal path tidy and out of the way of footswitches and patch cables.

Flat Rectangular Conductor and Space-Saving Connectors

Built around a flat, rectangular conductor profile that significantly reduces twisting and mechanical stress, this cable stands out from generic round MIDI cables. The Type B pinout routes MIDI 4 (Source) to the TRS tip, MIDI 5 (Sink) to the TRS ring, and MIDI 2 (Shield) to the TRS sleeve.

Connector Configuration — Straight DIN to Angled TRS

A straight-to-angled geometry lets the MIDI plug sit flush against a controller while the TRS end drops flat against the pedalboard.

  • Connector A: 5-pin DIN MIDI male, straight — standard MIDI hardware input/output
  • Connector B: 3.5 mm TRS stereo male, flat angled — saves vertical space on the pedalboard
  • Connector Angle: Straight to Angled — keeps the cable flush against the board surface

TRS-MIDI Type B Pin Assignment

Type B wiring is the critical functional spec for this cable. Using the wrong type means no MIDI communication. Pins 1 and 3 are intentionally left unconnected.

  • Classification: TRS-MIDI Type B — matches Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox devices

Cable Construction — Flat Profile

Reducing strain on solder joints and preventing the cable from springing back into a coil, the flat rectangular conductor is the key engineering choice here.

  • Length: 150 cm / 59 1/16" — enough reach for medium to large pedalboards
  • Cable Profile: Flat rectangular conductor — prevents twisting, breakage and cable jams
  • Color: Black — blends with standard pedalboard aesthetics

Suitability

Type

MIDI Cable

Kompatibel med

Universell

Properties

Farge

Svart

Inputs and Outputs

Mikrofoninngang

Nei

Connectors

Kontakt av type A

MIDI Male

Kontakt av type B

Jack STEREO 3,5 mm Male

Kontaktvinkel

Rett - Vinklet

Package

Pakkeinnhold

MIDI Cable

Dimensions and Weight

Lengde

150 cm

Country

Opprinnelsesland

Kina

Dokumenter

Informasjon om produsenten
Produsent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.