Velg land for levering av forsendelsen

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI-kabel

Produktkode: 1338165

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI-kabel

Produktkode: 1338165

The RockBoard Flat Mini-TRS to MIDI Cable (Type B, 60 cm) is a space-saving adapter cable that links a 3.5 mm stereo TRS MIDI output to a standard 5-pin DIN MIDI input. With its flat rectangular conductor profile, it keeps pedalboard wiring low-profile and resistant to the twisting and kinks that break ordinary round cables over time. Compact…

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI-kabel

The RockBoard Flat Mini-TRS to MIDI Cable (Type B, 60 cm) is a space-saving adapter cable that links a 3.5 mm stereo TRS MIDI output to a standard 5-pin DIN MIDI input. With its flat rectangular conductor profile, it keeps pedalboard wiring low-profile and resistant to the twisting and kinks that break ordinary round cables over time.

  • Compact straight 5-pin DIN MIDI plug on one end, flat right-angle 3.5 mm TRS stereo plug on the other
  • TRS-MIDI Type B pinout: MIDI 4 (Source) → TRS Tip, MIDI 5 (Sink) → TRS Ring, MIDI 2 (Shield) → TRS Sleeve
  • Flat rectangular cable cross-section prevents cable breakage, torsion and jams under pedals
  • 60 cm / 23 5/8" length suits compact pedalboards and desktop MIDI rigs where every centimetre counts
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 60 cm / 23 5/8" is a purpose-built adapter cable for routing MIDI between modern compact devices that expose a 3.5 mm TRS MIDI jack and traditional gear with a full-size 5-pin DIN MIDI port. The RockBoard Flat Mini-TRS to MIDI Cable Type B 60 cm is engineered for reliable performance, clean signal transmission, and efficient pedalboard organization. Its ultra-flat connectors and rectangular cable profile are aimed at players who want a tidy, low-clearance signal path without sacrificing the durability expected of a stage-ready MIDI cable.

What Sets This Cable Apart

Two design choices make this cable stand out in the crowded TRS-to-MIDI adapter market. First, the rectangular flat conductor geometry significantly reduces twisting and mechanical stress on the internal cores, helping prevent internal damage and ensuring long-term reliability in frequently reconfigured rigs. Second, the right-angle 3.5 mm TRS plug keeps the connector body almost flush with the pedal or controller chassis, so the cable barely adds any height — a real advantage on shallow boards and tight rack drawers.

Connector Configuration and Signal Path

The connector combination is the single most important spec for any TRS-to-MIDI cable, because the wrong pinout simply will not pass MIDI data. This model uses a straight 5-pin DIN MIDI male on one end and a right-angle 3.5 mm stereo (TRS) male on the other, wired to the TRS-MIDI Type B standard.

  • Connector A: 5-pin DIN MIDI male, straight — fits any standard MIDI In or MIDI Out on traditional synths, controllers and effects units
  • Connector B: 3.5 mm TRS stereo male, right-angle — plugs into the mini MIDI jacks found on compact pedals and desktop controllers
  • Connector Angle: straight-to-angled — the angled TRS end keeps the cable close to the enclosure for a low-profile install
  • Type B Pinout: MIDI 4 (Source) → TRS Tip, MIDI 5 (Sink) → TRS Ring, MIDI 2 (Shield) → TRS Sleeve, MIDI 1 & 3 not connected

Cable Construction and Form Factor

The flat rectangular cross-section is more than a styling choice — it directly affects how the cable survives daily pedalboard use. Round MIDI cables twist under load and eventually fail at the strain relief; a flat profile lays flat against the board, resists torsion, and routes cleanly between pedals.

  • Cable Profile: flat, rectangular cross-section — lays flush against the pedalboard surface and avoids cable jams
  • Length: 60 cm / 23 5/8" — short enough for compact boards, long enough to bridge a controller sitting next to a pedal
  • Colour: black — matches the rest of the RockBoard flat cable family for a uniform rig look

Compatibility and Use Cases

Type B wiring is the standard adopted by several major compact-device manufacturers, so this cable is the correct choice when connecting gear that documents its mini MIDI jack as Type B. It works with devices from Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox, among others. The 60 cm length is ideal for linking a desktop controller or a compact multi-effects unit to a traditional 5-pin MIDI instrument without leaving slack to catch on switches or knobs.

  • Compatible With: universal MIDI devices with 3.5 mm TRS Type B mini MIDI jacks and 5-pin DIN MIDI ports
  • Package Contents: 1 × MIDI cable (60 cm, Type B)
  • Typical Use: connecting compact pedals, desktop synths and grid controllers to traditional MIDI hardware

Suitability

Type

MIDI Cable

Kompatibel med

Universell

Properties

Farge

Svart

Inputs and Outputs

Mikrofoninngang

Nei

Connectors

Kontakt av type A

MIDI Male

Kontakt av type B

Jack STEREO 3,5 mm Male

Kontaktvinkel

Rett - Vinklet

Package

Pakkeinnhold

MIDI Cable

Dimensions and Weight

Lengde

60 cm

Country

Opprinnelsesland

Kina

Dokumenter

Informasjon om produsenten
Produsent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.