Velg land for levering av forsendelsen

Audio-Technica AT-VM95E/H Hi-Fi-kassett

4,9/5

Produktkode: 855572

Audio-Technica AT-VM95E/H Hi-Fi-kassett
4,9/5

Produktkode: 855572

Se også våre gode tilbudsalternativer. Du er kanskje interessert i dem:
Set includes AT-VM95E cartridge from VM95 series mounted on AT-HS6BK headshell. VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Audio-Technica AT-VM95E/H Hi-Fi-kassett

Som ny
Produkt som aldri har vært vist frem eller brukt. Produktet er i 100 % stand, men emballasjen kan ha små visuelle feil på grunn av håndtering under lagring eller transport. Egnet for dem som søker et høykvalitetsprodukt til en fordelaktig pris, uten kompromisser på funksjonalitet eller ytelse. Produktet dekkes av full lovpålagt garanti.

Set includes AT-VM95E cartridge from VM95 series mounted on AT-HS6BK headshell.

VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.
  • VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Frequency Response: 20 - 22,000 Hz
  • Channel Separation: 20 dB (1 kHz)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
  • Stylus Shape: Elliptical
  • Stylus Size: 0.3 x 0.7 mil
  • Stylus Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil Impedance: 3.3 kOhm (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • DC Resistance: 485 Ohm
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  • Wire Used for Coil: T.P. Copper
  • Recommended Load Impedance: 47,000 Ohm
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: AT-VMN95E
  • Dimensions: 21,2 x 21,4 x 62,4 mm
  • Weight: 15,5 g

Suitability
Properties

Shape

Elliptical

Tracking Force

1,8g - 2,2g

Tracking force recommended

2 g

Tracking angle

23°

Stylus tip radius

0,3 x 0,7 mil

Frequency Range

20 Hz - 22 kHz

Compliance

7 x 10-6 cm (100 Hz)

Recommended load resistance

47 kOhm

Recommended load capacitance

100 - 200 pF

Acoustics

Channel balance at 1 kHz

2 dB

Channel separation at 1 kHz

20 dB

Package

Package Contents

Screws, Washer (2 x)

Power supply

Voltage

4 mV

Dimensions and Weight

Weight

6,1 g

Country

Made in

Japan

Basert på antall vurderinger: 31

Kundevurderinger av produktet

Alle vurderinger kommer fra verifiserte kunder som har kjøpt et produkt fra oss tidligere.

Dokumenter

Informasjon om produsenten
Produsent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Nederland
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.