Velg land for levering av forsendelsen

RockBoard RBO POW BLO ISO 10V2 Strømforsyningsadapter

Produktkode: 1338174

RockBoard RBO POW BLO ISO 10V2 Strømforsyningsadapter

Produktkode: 1338174

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably. 10…

RockBoard RBO POW BLO ISO 10V2 Strømforsyningsadapter

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.

  • 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
  • Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
  • Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
  • Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

Clean Isolated Power for a Full Pedalboard

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.

Standout Engineering

Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.

Power Outputs and Voltage Configuration

  • 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
  • 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
  • Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board

Filtering and Protection

  • Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
  • HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
  • Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running

Physical Specs and Package Contents

  • Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
  • Weight: 180 g — light enough not to weigh down a touring rig
  • Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
  • Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)

Suitability
Features

Antall utganger

more than 8

Inputs and Outputs

Polaritet

Center Minus

Package

Pakkeinnhold

Adapter, Strømkabel, Y-Cable

Power supply

Ladertype

Strømforsyning

Spenning

9V, 18V

Strømstyrke

2000 mA

Pluggtype

Barrel

Strømforsyning

Adapter

Accessory

Strømforsyning inkludert

Ja

Dimensions and Weight

Bredde (mm)

70

Dybde (mm)

123

Høyde (mm)

26

Nettovekt (kg)

0,18

Country

Opprinnelsesland

Kina

Dokumenter

Instruksjoner for bruk
Informasjon om produsenten
Produsent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.