Velg land for levering av forsendelsen

RockBoard RBO B LED STRIP 80 Lamp

Produktkode: 1338181

RockBoard RBO B LED STRIP 80 Lamp

Produktkode: 1338181

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a self-adhesive RGB lighting strip designed specifically for effects pedalboards. It connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and runs on 5–12 V DC. The strip carries 45 RGB SMD LEDs, can be trimmed every 5 cm, and offers static or dynamic…

RockBoard RBO B LED STRIP 80 Lamp

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a self-adhesive RGB lighting strip designed specifically for effects pedalboards. It connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and runs on 5–12 V DC. The strip carries 45 RGB SMD LEDs, can be trimmed every 5 cm, and offers static or dynamic colour modes with adjustable speed.

  • 80 cm length with 45 RGB SMD LEDs for even pedalboard illumination
  • Self-adhesive 3M backing for tool-free mounting under or along board edges
  • Powered by any standard 5–12 V pedalboard PSU via 2.1 x 5.5 mm barrel socket
  • Cuttable every 5 cm to fit custom pedalboard layouts
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

Pedalboard Illumination That Drops Into Any Rig

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a purpose-built ambient lighting strip for effects pedalboards. It mounts on the underside or edges of a board, adding stage atmosphere and practical visibility for players reading footswitches in low light. Power is drawn from any standard pedalboard PSU through a 2.1 x 5.5 mm barrel socket, so no extra adapter is needed. This LED strip is the right choice for guitarists and bassists who want a clean, integrated lighting upgrade without adding another wall-wart to their rig.

Engineered Around the Pedalboard PSU

Unlike generic RGB strips, this model is built around the 2.1 x 5.5 mm DC barrel connector that already lives on most pedalboard power supplies. The 3M adhesive backing and included alcohol pad ensure a long-lasting bond, while cut points every 5 cm let the strip be trimmed to fit smaller boards without breaking the circuit.

Lighting Performance — RGB SMD Configuration

The strip uses RGB SMD LEDs that support static colours, dynamic colour-changing modes and adjustable speed.

  • LED Type: RGB SMD
  • Number of LEDs: 45 — evenly distributed across the 80 cm strip
  • Cuttable Segments: approx. every 5 cm (3 LEDs per segment)

Power Requirements — Drop-In Compatibility

Power delivery uses the same DC barrel ecosystem that powers the effects pedals themselves, so no separate power brick is needed.

  • Operating Voltage: 5–12 V DC, centre negative
  • Current Draw: approx. 210 mA at 9 V
  • Connection: 2.1 x 5.5 mm barrel socket

Physical Dimensions & Installation

The slim profile keeps the strip discreet when mounted under the board.

  • Length: 800 mm
  • Width: 10 mm
  • Height: 3 mm
  • Connection Cable Length: approx. 250 mm (incl. socket)
  • Mounting: self-adhesive 3M backing tape
  • Package Contents: alcohol cleaning pad, 2 self-adhesive cable-tie holders, 3 cable ties

Suitability

Type

Lamp

Package

Pakkeinnhold

Kabelstrips

Power supply

Strømforsyning

Adapter (not included)

Accessory

Strømforsyning inkludert

Nei

Dimensions and Weight

Lengde (cm)

80

Bredde (mm)

10

Høyde (mm)

3

Country

Opprinnelsesland

Kina

Dokumenter

Instruksjoner for bruk
Informasjon om produsenten
Produsent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.