Velg land for levering av forsendelsen

RockBoard RBO B LED STRIP 50RC Lamp

Produktkode: 1338180

RockBoard RBO B LED STRIP 50RC Lamp

Produktkode: 1338180

The RockBoard LED Strip 50 cm with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility mid-performance. The self-adhesive 3M-backed strip mounts under or along the edges of the board and draws power from any standard pedalboard PSU via a 2.1 x 5.5 mm…

RockBoard RBO B LED STRIP 50RC Lamp

The RockBoard LED Strip 50 cm with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility mid-performance. The self-adhesive 3M-backed strip mounts under or along the edges of the board and draws power from any standard pedalboard PSU via a 2.1 x 5.5 mm barrel socket.

  • 50 cm RGB SMD LED strip with 30 colour-changing LEDs for pedalboard illumination
  • Wireless remote control for switching mode, speed and colour without reaching under the board
  • Powered by 5–12 VDC pedalboard PSU at approx. 130 mA (9 V) — no separate mains adapter needed
  • Cut-to-fit every 5 cm (3 LEDs) and includes alcohol pad, cable-tie holders and ties for tidy installation
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå. Beskrivelsen på engelsk kan være til hjelp.

Pedalboard LED Strip with Remote Control — Ambient Stage Lighting

The RockBoard LED Strip 50 cm / 19,69" - Pedalboard Illumination with Remote Control adds RGB accent lighting to any effects pedalboard, giving players a personalised look on dark stages and clearer footswitch visibility. The 50 cm strip mounts under or along the board edges and connects to a 2.1 x 5.5 mm barrel socket on any 5–12 VDC pedalboard PSU.

What Sets This LED Strip Apart

Unlike generic USB-powered LED strips, this RockBoard design runs directly from the pedalboard's own DC power supply — no extra wall adapter needed on stage. The included wireless remote changes settings and colours remotely, and the strip trims every 5 cm to fit boards from compact to mid-size.

LED Configuration and Light Output

RGB SMD LEDs along a flexible PCB produce colour-changing output in static hues or animated modes. With 30 LEDs across 50 cm, illumination stays even along the board's underside or edge.

  • LED Type: RGB SMD — full-colour mixing for static and animated modes
  • Number of LEDs: 30
  • Light Colour: colour changing
  • Control: Mode / Speed / Colour via wireless remote

Dimensions and Mounting

Once installed, the slim profile stays out of the way, and the 3M self-adhesive backing bonds to most pedalboards after a clean with the included alcohol pad.

  • Length: 50 cm — fits compact and mid-size pedalboards
  • Width: 10 mm
  • Height: 3 mm — low profile, won't interfere with pedals above
  • Cuttable: approx. every 5 cm (3 LEDs)
  • Mounting: self-adhesive 3M backing tape

Power Supply and Package Contents

Power comes directly from the pedalboard's existing PSU through a standard barrel socket — no extra mains adapter required.

  • Power Supply: 5–12 VDC, centre negative — runs from any standard pedalboard PSU
  • Connection: 2.1 x 5.5 mm barrel socket
  • Current Draw: approx. 130 mA at 9V
  • Connection Cable: approx. 25 cm incl. socket
  • Package: LED strip, remote controller, alcohol pad, 2 cable-tie holders, 3 cable ties

Suitability

Type

Lamp

Package

Pakkeinnhold

Kabelstrips, Fjernkontroll

Power supply

Strømforsyning

Adapter (not included)

Accessory

Strømforsyning inkludert

Nei

Dimensions and Weight

Lengde (cm)

50

Bredde (mm)

10

Høyde (mm)

3

Country

Opprinnelsesland

Kina

Dokumenter

Instruksjoner for bruk
Informasjon om produsenten
Produsent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhetsinstruksjoner

Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.