Albania
Argentina
Australia
Belgia
Bosnia-Hercegovina
Brasil
Bulgaria
Canada
Chile
Colombia
Danmark
Estland
Filippinene
Finland
France
Hellas
Irland
Italia
Kroatia
Latvia
Litauen
Luxembourg
Mexico
Moldova
Montenegro
Nederland
New Zealand
Nord-Makedonia
Norge
Polen
Portugal
Romania
Sambandsstatene
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Sveits
Sverige
Sør-Afrika
Tsjekkia
Tyrkia
Tyskland
Ukraina
Ungarn
Østerrike
Salget er avsluttet
Dette produktet produseres ikke lenger eller er ikke lenger en del av vårt tilbud.
Vi anbefaler at du velger et alternativt produkt.
Audio-Technica AT-VM95C
Velg et alternativ (4)
The entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL. Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata....
Audio-Technica AT-VM95C
The entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL. Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata. Features: Aluminium cantilever; 4.0mV output voltage; Compatible body with all VM95 Series stylus assemblies; Replacement for AT91, AT91R and CN5625AL
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå.
Beskrivelsen på engelsk kan være til hjelp.
Model: AT-VM95C
Type: VM Stereo Dual Magnet
Mounting: 1/2” centres
Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB (1 kHz)
Output Channel Balance: 2.5 dB (1 kHz)
Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
Stylus Shape: Conical
Stylus Size: 0.6 mil
Stylus Construction: Bonded Round Shank
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Recommended Load Capacitance: 100-200 pF
Cartridge Weight: 6.1g
Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement Stylus: AT-VMN95C
Accessories Included: Two 11 mm installation screws; Two 8 mm installation screws; Two washers
Suitability
Properties
Shape
Tracking Force
Tracking force recommended
2 g
Tracking angle
23°
Stylus tip radius
0,6 mil
Frequency Range
Compliance
6,5 x 10-6 cm (100Hz)
Recommended load resistance
47 kOhm
Recommended load capacitance
100 - 200 pF
Acoustics
Channel balance at 1 kHz
2,5 dB
Channel separation at 1 kHz
18 dB
Package
Package Contents
Power supply
Voltage
Dimensions and Weight
Weight
6,1 g
Country
Made in
China
Dokumenter
Informasjon fra produsenten
Produsent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Nederland
Sikkerhetsinstruksjoner
Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.
