RME HDSP-TCO
RME HDSP-TCO
The TCO module is an optional extension for selected RME cards. Placed in a free slot of the computer chassis the TCO will be connected with the main card via a flat ribbon cable.
The small module provides the HDSPe cards with a Word Clock input and offers a synchronization to LTC and video. Thanks to SteadyClock (TM), the TCO not only extracts absolute positions from LTC, but also a very clean low-jitter word clock from LTC and video. Thus a sample accurate timecode synchronization to audio or video sources is assured.
One single TCO can be used with different HDSP/HDPe cards at the same time (multicard), if connected to a supported card.
Supported cards: HDSP AES-32. HDSPe AIO, RayDAT, AES, MADI, PCI Card.
LTC In
- BNC unbalanced
- Level range: -25 dBu up to +12 dBu
Video In (Word Clock In)
- BNC switchable termination 75 Ohm
- Format: PAL and NTSC
Word Clock In (Video In)
- BNC, switchable termination 75 Ohm
- Transformer coupled, galvanically isolated input
- Not affected by DC-offsets within the network
- Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
- Overvoltage protection
- Level range: 1.0 Vpp - 5.6 Vpp
- Lock Range: 28 kHz - 200 kHz
- Jitter when synced to input signal: < 1 ns
- Jitter suppression: > 30 dB (2,4 kHz)
LTC Out
- BNC
- Output level: +4 dBu, via Jumper -7 dBu
- Outputs impedance: 220 Ohm
Word Clock Out
- BNC
- Max output voltage: 5 Vpp
- Output voltage @ 75 Ohm: 4,0 Vpp
- Outputs impedance: 10 Ohm
- Frequency range: 28 kHz - 52 kHz
- Power supply via ribbon cable, 5 V DC, 100 mA
- Standard bracket, Dimensions PCB: 98 x 75 mm
Тype
PCI Sound Card
Sample Rate
UK/EU Power supply included
No
Made in
Germany
Dokumenter
Informasjon fra produsenten
Sikkerhetsinstruksjoner
Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.