FiiO KA13 Hi-Fi hodetelefonforforsterker Black

FiiO KA13 — Desktop-Grade Power in a Dongle-Sized DAC and Headphone Amplifier

The FiiO KA13 is a portable DAC and headphone amplifier engineered to bring desktop-tier current into a 56 mm-long aluminum body. A dedicated desktop mode lifts balanced output to 550 mW per channel — enough headroom for demanding planars and high-impedance over-ears. The Midnight black finish ships with a detachable USB-C cable and a Lightning adapter for direct iOS use. Inside, dual CS43131 DAC chips and dual SGM8262 op-amps decode 32-bit/384 kHz PCM and native DSD256 while keeping the noise floor below 1.7 µV on the single-ended output.

What Sets this model Apart from Other Dongle DACs

Most Cirrus Logic dongles stop near 200 mW per channel; this device pushes past that ceiling with a hardware desktop mode that doubles current on the 4.4 mm balanced output. The 3.5 mm port doubles as a coaxial SPDIF transmitter, feeding an external desktop DAC when more refinement is needed. An RGB ambient window on the rear glass changes colour with the active format — light blue for PCM ≤48 kHz, yellow for higher-rate PCM, green for DSD — so source quality is visible at a glance.

Decoding Architecture — Hi-Res Signal Path for Demanding Headphones

The DAC stage pairs two CS43131 chips in dual-mono, keeping left and right channels on separate silicon for cleaner separation. Combined with two SGM8262 op-amps, the path delivers THD+N below 0.0005% and SNR of at least 122 dB balanced.

• DAC Chips: 2 × Cirrus Logic CS43131 — dual-mono decoding for cleaner channel separation
• Op-Amps: 2 × SGM8262 — high-current analog stage for IEMs and full-size headphones
• Hi-resolution signal path supporting 32-bit/384 kHz PCM and native DSD256 covers demanding studio-grade masters.

Output Power — Driving Planars and High-Impedance Cans from a Dongle

Headphone output power decides whether a portable amp can control a difficult load. In desktop mode the unit delivers 550 mW per channel into 32 Ω balanced and 170 mW per channel single-ended, with output impedance held below 1.8 Ω so frequency response stays flat across multi-driver IEMs.

• Balanced Output (4.4 mm): 550 mW per channel @ 32 Ω in desktop mode — drives planar magnetics and 300 Ω+ dynamics
• Single-Ended Output (3.5 mm): 170 mW per channel @ 32 Ω — clean drive for sensitive IEMs
• Low output impedance under 1.8 Ω on both jacks preserves multi-BA IEM tuning.

Connectivity — USB-C, Dual Headphone Jacks, and App Customisation

The chassis fits USB-C 2.0, 3.5 mm single-ended, and 4.4 mm balanced into a 56.3 × 22 × 10.5 mm footprint. The 3.5 mm port reassigns to coaxial SPDIF via the FiiO Control app, turning the dongle into a digital bridge for an external DAC chain.

• USB Input: USB-C 2.0, detachable cable — works with Android, iOS (via included Lightning adapter), Windows, and Mac
• Headphone Outputs: 3.5 mm SE + 4.4 mm balanced — covers both common cable terminations
• The 3.5 mm port reassigns to coaxial SPDIF output via the FiiO Control app for added versatility.

Who Should Buy this instrument

This unit is the right choice for audiophiles who want desktop-grade current from a dongle that slips into a pocket. Listeners running power-hungry planars, sensitive multi-BA IEMs, or balanced-cable monitors will find a match through the dual outputs. Mobile users get included Lightning and USB-A adapters; desktop listeners can use SPDIF mode to feed a separate DAC. The 18.5 g chassis and detachable cable make it easy to carry between home, office, and travel setups.

FiiO — From Desktop Flagships to Pocket Dongles

The company built its reputation on portable players and desktop DACs such as the M17 and Q7, both featuring a desktop mode praised for delivering full-size current from compact enclosures. This dongle brings that philosophy down to size, with CNC-machined aluminum, anti-scratch glass, and Hi-Res Audio certification from the Japan Audio Society.