Albania
Argentina
Australia
Belgia
Bosnia-Hercegovina
Brasil
Bulgaria
Canada
Chile
Colombia
Danmark
Estland
Filippinene
Finland
France
Hellas
Irland
Italia
Kroatia
Latvia
Litauen
Luxembourg
Mexico
Moldova
Montenegro
Nederland
New Zealand
Nord-Makedonia
Norge
Polen
Portugal
Romania
Sambandsstatene
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Sveits
Sverige
Sør-Afrika
Tsjekkia
Tyrkia
Tyskland
Ukraina
Ungarn
Østerrike
72,40 NKr
Som ny
Produkt som aldri har vært vist frem eller brukt. Produktet er i 100 % stand, men emballasjen kan ha små visuelle feil på grunn av håndtering under lagring eller transport. Egnet for dem som søker et høykvalitetsprodukt til en fordelaktig pris, uten kompromisser på funksjonalitet eller ytelse. Produktet dekkes av full lovpålagt garanti.
På lager 1 del
Dette produktet kan for øyeblikket ikke leveres til landet ditt.
Se også våre gode tilbudsalternativer. Du er kanskje interessert i dem:
Pack of 10 original mouthpieces for alcohol testers S80, Trace or Element - they are made of hygienic plastic, easily removable, washable and possibly reusable. Soap water, rinsing and air drying are enough for cleaning. The mouthpieces do not affect the accuracy or operation of the alcohol tester and facilitate safe testing in the team.
BACtrack MPP10
Som ny
Pack of 10 original mouthpieces for alcohol testers S80, Trace or Element - they are made of hygienic plastic, easily removable, washable and possibly reusable. Soap water, rinsing and air drying are enough for cleaning. The mouthpieces do not affect the accuracy or operation of the alcohol tester and facilitate safe testing in the team.
Ytterligere beskrivelse på ditt språk er ikke tilgjengelig ennå.
Beskrivelsen på engelsk kan være til hjelp.
If you have purchased a BACtrack breathalyzer and need to calibrate it, simply send a request to Sunnysoft's email. Calibration is important to maintain the accuracy and optimal performance of your device.
Calibration is recommended at least every 12 months or after a maximum of 500 measurements, depending on the frequency of use. If the tester shows inaccurate or inconsistent results, or if the test values are abnormally high or low, it is necessary to have it calibrated by a professional. Also, if the tester has not been used for several weeks, it is advisable to periodically "revive" the sensor by breathing into the device to prevent it from drying out.
Calibration takes place under controlled conditions, with technicians verifying the accuracy of the device and performing various diagnostic tests. After calibration, you will receive reports on the status of the device, which will be returned in a fully functional condition.
Remember that calibration is not covered by the device warranty, which only covers manufacturing defects. For details on calibration or if you have any further questions, please contact Sunnysoft via email.
Calibration is recommended at least every 12 months or after a maximum of 500 measurements, depending on the frequency of use. If the tester shows inaccurate or inconsistent results, or if the test values are abnormally high or low, it is necessary to have it calibrated by a professional. Also, if the tester has not been used for several weeks, it is advisable to periodically "revive" the sensor by breathing into the device to prevent it from drying out.
Calibration takes place under controlled conditions, with technicians verifying the accuracy of the device and performing various diagnostic tests. After calibration, you will receive reports on the status of the device, which will be returned in a fully functional condition.
Remember that calibration is not covered by the device warranty, which only covers manufacturing defects. For details on calibration or if you have any further questions, please contact Sunnysoft via email.
Package
Package Quantity (pcs)
10
Country
Made in
China
Dokumenter
Instruksjoner for bruk
Sikkerhetsinstruksjoner
Se brukerhåndboken for spesifikke sikkerhetsinstruksjoner for dette produktet.
